Three-way tipper trailer

Humbauer HTK 754020

HTK 754020

Weights
Permissible total weight (technical): 7,500 kg
Fifth wheel load: 500 kg
Unladen weight: approx. 2,250 kg
Payload with standard equipment: approx. 5,250 kg

Dimensions
Platform dimensions (length x width x height): approx. 4000 x 2030 x 400 mm
Side panel height: approx. 400 mm
Loading height with unladen vehicle: approx. 920 mm
Free drawbar length: approx. 1900 mm
Coupling height unladen: approx. 560-840 mm
Overall dimensions (L x W x H): approx. 6,070 x 2,200 x 1,450 mm
Tire size: 215/75 R 17.5
Tilting angle (side/rear): 45° / 48°
Oil capacity: 10L
Mechanical V-value: 14.8
Pneumatic V-value: 11.1
2 pairs of 3,000 kg each per tie-down point, folding tie-down eye recessed into the corners
3 pairs of 2,000 kg each per tie-down point, tie-down bracket recessed in the longitudinal direction of the platform

--

Axles
Axle assembly from reputable manufacturers;

Suspension
Maintenance-free parabolic suspension with load compensation;

Tires
Tires according to manufacturer's choice;

Braking System
ABS braking system according to ECE Directive
with ALB function;
ABS connector ISO 7638;
Spindle parking brake;
2x non-interchangeable coupling heads red/yellow ISO 1728;

Electrical System
24 Volt lighting system with multi-chamber tail lights
and LED side marker lights;
15-pin connector for lighting;
Credpfxezrlmde Afwji

Coupling Device
Drawbar tube with DIN screw coupling eye 40mm, galvanized,
infinitely adjustable via crank;

Frame
Solid, welded, and hot-dip galvanized frame;
Lockable compartment for 2 optional ramps;

Equipment
Fixed side impact protection, from the beginning of the platform to the 1st axle
Fenders on front and rear axles with splash guard system;
2 wheel chocks with holder;
Contour marking on the side and rear;
Space for a single-line license plate;

Supports
Heavy-duty automatic support leg;

Hydraulics
Hydraulic three-way tilting system with control via the towing vehicle (max. 200 bar);
Five-stage nitrided cylinder with stroke limitation and safety cables;
Hydraulic quick-release coupling SVK BG3 as single-circuit connection;

Platform
Platform floor made of 4 mm steel sheet;
Reinforced platform frame, hot-dip galvanized;
4 ball coupling bearings with 2 non-interchangeable tilting pivot bolts;

Side Panels
Laser-welded high-quality steel side panels, 400 mm high;
Side panels can be folded down and removed;
Rear flap can be folded down, removed, and swings with central locking
Front panel made of steel, removable;
Side panels primed and painted according to RAL (color on request)

+++
Without ramps => Optional, at an additional cost of €1590.00 net plus VAT

1 pair of aluminum ramps
Support feet available on request
Length x Width approx. 3,050 x 400 mm
Load capacity approx. 4,390 kg/pair at a wheelbase of 1,500 mm
Weight / piece approx. 31 kg
Ramp angle approx. 16°
+++

+++
Side panels, platform, and chassis frame hot-dip galvanized (side panels hot-dip galvanized / not painted!)
+++

- - all information without guarantee - - illustrations may differ - -

L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.