Machine à foin / Faneuse / Outil de prairie
Metal-Fach Ballenwickler Z 529 selbstladend hydr
Machine à foin / Faneuse / Outil de prairie
Metal-Fach Ballenwickler Z 529 selbstladend hydr
Année de construction
2024
État
Nouveau
Lieu
Gevelsberg
Montrer les photos
Afficher la carte
DONNÉES DE BASE
- Désignation:
- Machine à foin / Faneuse / Outil de prairie
- Modèle:
- Metal-Fach Ballenwickler Z 529 selbstladend hydr
- Année de construction:
- 2024
- État:
- nouveau
PRIX ET LOCALISATION
- Emplacement de l'annonce:
- Am Sinnerhoop 17, 58285 Gevelsberg, DE
Appeler
DÉTAILS DE L’OFFRE
- Identifiant de l'annonce:
- A660-16-51
- Dernière mise à jour:
- le 17.07.2024
DESCRIPTION
Metal tray
Bale wrapper
Z529
self-loading
P0Urt
Length: 2220mm
width: 1420mm
height: 2650mm
Own weight: 780kg
Tractor hitch: three-point hitch
Machine drive: hydraulic
Tractor power: 60KW
Empfolene delivery capacity of the tractor pump: 26l/min
Empfolener hydraulic pressure: 14 MPa
Bale size 1200mm - 1500mm
Film width: 750mm
Standard equipment:
3-point hitch
Film cutter
Film pre-stretcher 750mm
Manual control panel
Semi-automatic or fully automatic wrapping process
The Z529 bale wrapper is a machine that is suspended from the front or rear three-point linkage of the tractor. It is loaded from below by means of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm rotating around the bale with an attached film feeder, which coats the bale rotating on the rollers with film. Once the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a push button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. It takes about two minutes to wrap a bale with a diameter of 1200 mm. The compact dimensions of the machines allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feeder, a hydraulically driven film cutter and the control panel. As an option, the machine can be equipped with a hydraulic bale placer, which enables the wrapped bale to be placed on its base.
ATTENTION !!!!! MUST READ !!!!!
We expressly reserve the right to prior sale, as we also offer this item on other portals.
We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!!
Illustrations similar, may contain accessories subject to a surcharge.
The interior dimensions given are approximate.
TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!!
TRADE-INS AND TRADE-INS POSSIBLE !!!
Showroom: 58285 Gevelsberg , Am Sinnerhoop 17
Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00
always over 500 new and used trailers in stock !!!
Imprint:
Pegasus Trailers
Am Sinnerhoop 17
58285 Gevelsberg
Phone: Fax:
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Bale wrapper
Z529
self-loading
P0Urt
Length: 2220mm
width: 1420mm
height: 2650mm
Own weight: 780kg
Tractor hitch: three-point hitch
Machine drive: hydraulic
Tractor power: 60KW
Empfolene delivery capacity of the tractor pump: 26l/min
Empfolener hydraulic pressure: 14 MPa
Bale size 1200mm - 1500mm
Film width: 750mm
Standard equipment:
3-point hitch
Film cutter
Film pre-stretcher 750mm
Manual control panel
Semi-automatic or fully automatic wrapping process
The Z529 bale wrapper is a machine that is suspended from the front or rear three-point linkage of the tractor. It is loaded from below by means of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm rotating around the bale with an attached film feeder, which coats the bale rotating on the rollers with film. Once the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a push button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. It takes about two minutes to wrap a bale with a diameter of 1200 mm. The compact dimensions of the machines allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feeder, a hydraulically driven film cutter and the control panel. As an option, the machine can be equipped with a hydraulic bale placer, which enables the wrapped bale to be placed on its base.
ATTENTION !!!!! MUST READ !!!!!
We expressly reserve the right to prior sale, as we also offer this item on other portals.
We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!!
Illustrations similar, may contain accessories subject to a surcharge.
The interior dimensions given are approximate.
TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!!
TRADE-INS AND TRADE-INS POSSIBLE !!!
Showroom: 58285 Gevelsberg , Am Sinnerhoop 17
Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00
always over 500 new and used trailers in stock !!!
Imprint:
Pegasus Trailers
Am Sinnerhoop 17
58285 Gevelsberg
Phone: Fax:
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
FOURNISSEUR
Personne de contact : M. Max Schnee
Am Sinnerhoop 17
58285 Gevelsberg, Allemagne
+49 2332 ... afficher
Envoyer une demande
TÉLÉPHONE & FAX
+49 2332 ... afficher
Ces petites annonces pourraient également vous intéresser.
Annonce
Gevelsberg
683 km
Machine à foin / Faneuse / Outil de prairie
Metal-Fach Z577 Ballenwickler Auto Beladung
Metal-Fach Z577 Ballenwickler Auto Beladung
Annonce
Gevelsberg
683 km
Machine à foin / Faneuse / Outil de prairie
Metal-Fach Z593 Ballenwickler NEU Baujahr 2024
Metal-Fach Z593 Ballenwickler NEU Baujahr 2024
Annonce
Gevelsberg
683 km
Autres appareils
Metal-Fach Böschungsmulcher Z022/3
Metal-Fach Böschungsmulcher Z022/3
Annonce
Gevelsberg
683 km
Autre
Metal-Fach T019/2 Ballenwagen 20t. Neufahrzeug
Metal-Fach T019/2 Ballenwagen 20t. Neufahrzeug
Annonce
Gevelsberg
683 km
Benne basculante 3 côtés
Metal-Fach T730/3 Dreiseitenkipper 16To 40km/h
Metal-Fach T730/3 Dreiseitenkipper 16To 40km/h
Annonce
Gevelsberg
683 km
Machine à foin / Faneuse / Outil de prairie
Metal-Fach Z562 RN Rundballenpresse NEU
Metal-Fach Z562 RN Rundballenpresse NEU
Annonce
Gevelsberg
683 km
Machine à foin / Faneuse / Outil de prairie
Metal-Fach Rundballenpresse Z562 RN feste Kammer
Metal-Fach Rundballenpresse Z562 RN feste Kammer
Annonce
Gevelsberg
683 km
Epandeur de fumier
Metal-Fach N267 Miststreuer Dungstreuer Neu
Metal-Fach N267 Miststreuer Dungstreuer Neu
Annonce
Gevelsberg
683 km
Autres appareils
Metal-Fach Ballenzange 600kg
Metal-Fach Ballenzange 600kg
Annonce
Gevelsberg
683 km
Machine à foin / Faneuse / Outil de prairie
Metal-Fach Rundballenpresse Z562 RN
Metal-Fach Rundballenpresse Z562 RN
Annonce
Gevelsberg
683 km
Epandeur de fumier
Metal-Fach N280/2 Miststreuer Dungstreuer
Metal-Fach N280/2 Miststreuer Dungstreuer
Annonce
Gevelsberg
683 km
Machine de travail du sol
Metal-Technik Wiesenwalze hydr Fahrwerk 3m
Metal-Technik Wiesenwalze hydr Fahrwerk 3m
Annonce
Gevelsberg
683 km
Plate-forme de travail
Metal-Fach Ballenwagen T014/2 2-Achser
Metal-Fach Ballenwagen T014/2 2-Achser
Annonce
Gevelsberg
683 km
Benne basculante 3 côtés
Metal-Fach T711/3 2-Achs 3-Seitenkipper 16to
Metal-Fach T711/3 2-Achs 3-Seitenkipper 16to
Annonce
Gevelsberg
683 km
Autres appareils
Metal-Fach T814/1 Kehrmaschine SONDERPREIS 1,8m
Metal-Fach T814/1 Kehrmaschine SONDERPREIS 1,8m
Annonce
Gevelsberg
683 km
Benne basculante 3 côtés
Metal-Fach T730/3 und T711/3 Dreiseitenkipper
Metal-Fach T730/3 und T711/3 Dreiseitenkipper
Annonce
Gevelsberg
683 km
Autres appareils
Metal Fach Kehrmaschine T814/1, 1,80m
Metal Fach Kehrmaschine T814/1, 1,80m
Annonce
Gevelsberg
683 km
Benne basculante 3 côtés
Metal-Fach Typ T739 Zweiachsanhänger 18to
Metal-Fach Typ T739 Zweiachsanhänger 18to
Annonce
Gevelsberg
683 km
Autre
Metal-Fach 2-Achsanhänger T739 18to
Metal-Fach 2-Achsanhänger T739 18to
Annonce
Gevelsberg
683 km
Plate-forme de travail
Metal-Fach Ballenwagen T009 3-Achser
Metal-Fach Ballenwagen T009 3-Achser
Annonce
Gevelsberg
683 km
Autres appareils
Metal-Fach Kehrmaschine T814/3 NEU Frontlader
Metal-Fach Kehrmaschine T814/3 NEU Frontlader
Annonce
Gevelsberg
683 km
Tondeuse
Metal-Fach Z011/3 Scheibenmähwerk 3,3m
Metal-Fach Z011/3 Scheibenmähwerk 3,3m
Annonce
Gevelsberg
683 km
Machine à foin / Faneuse / Outil de prairie
Metal-Fach Z093 Front-Mähwerk 3m NEU
Metal-Fach Z093 Front-Mähwerk 3m NEU
Annonce
Gevelsberg
683 km
Epandeur de fumier
Metal-Fach N280/2 Miststreuer Dungstreuer
Metal-Fach N280/2 Miststreuer Dungstreuer
Annonce
Gevelsberg
683 km
Epandeur de fumier
Metal-Fach N275 Miststreuer Dungstreuer Neu
Metal-Fach N275 Miststreuer Dungstreuer Neu
Votre annonce a été supprimée
Une erreur est survenue